[ 1.02.60 ] 
	- supported the YMCKOKR ribbon
	- supported the compact multi hopper on the driver
	- added the function to set the direction of the cleaning process
	- added the function to set the Public key in the Laminator
	- added the logic to occur init error when flipper out sensor detects a card while initializing
	- modified the option to fix the direction of cleaning to backside if the multi-hopper is installed
	- modified the option to consider the panel is black if the RGB value is under 85% with BO ribbon 
	- modified the logic that considers the card is inserted after Card In action even though Card In sensor doesn't detect a card on SBS mode & portable mode
	- modified the logic to enter the cleaning process that Top cover is opened and ribbon is removed when booting up while right LED button is pushing
	- fixed the bug that the K ribbon doesn't count the printing issue on 600 & 1200 DPI



[ 1.02.50 ]
 
	- added the function that The cleaning process begins when initialization while holding down a right LED button 
	(main LED button on SMART-31/21)



[ 1.02.47 ] 

	- supported the SMART-21



[ 1.02.45 ]

	- increased the time to eject a cleaning card by 25% more 
	- added the option to laminate or not when test printing with 51L.
	- supported Chinese language on GLCD panel



[ 1.02.33 ]

	- supported the Portable mode
	- added the 'Auto Card In' function on Portable mode
	- added the function to remove the printing data when the card is not inserted on Portable mode
	- added the function to control the SMART-70 multi hopper in KIOSK model (New Driver should be supported)
	- added the function to show 'Card Empty' message on LCD panel when card is not loaded in the hopper. (Set in CardPrinterConfig)
	- modified the minimum value of overlay density from -500 to -1000
	- fixed the bug to lock/unlock the printer by SDK 
	- fixed the bug that prints abnormally when 1200 DPI is set
	- fixed the bug to occur the 'Prefetch Abort' error when the wrong memory address is used
	- fixed the bug that changed configuration value is not saved when the alternate film is inserted in the laminator.



[ 1.02.24 ]

	- supported the BO ribbon 
	- added the function to insert the value of null range on ballys mode of magnetic encoding 
	- modified the function that Color Out Sensor works when sensing a ribbon color only 
	   (turn it off when stand-by or other operations) 
	- modified the function to update the color value when printing
	- modified the cleaning message on LCD panel from "Do Prt Clean!" to "Clean Printer"
	- fixed the bug that Prefetch abort error when printing



[ 1.02.16 ]

	- added the 'Cancel Only' mode that cancel button on LED is only activated when error occurs
	- added the function that prints a test page by LED button with KO ribbon
	- modified the function that doing alignment onetime while MS encoding when Hopper Align is set to 'USE'



[ 1.02.12 ]

	- fixed the bug that the temperature of TPH is not able to be adjusted in rewritable mode.


[ 1.02.09 ]

	- added the function to re-search the color value for recovering an error while searching a color panel.
	- added the Ribbon Calibration Mode
	- added the Calibration Command
	- added the function to show the IP and other values of Network Module and Wifi module on the LCD display
	- added the function to consider an error when MAG Start,End Code exist but length of Data is 0. 
	- modified magnetic LOCO CURRENT value from 150 to 200
	- modified the time (10 seconds) to insert the cleaning card on cleaning mode with SMART-31
	- modified the function to sensing a color and level. 
	- modified the logic of countdown the balance that calculated value is used when the balance is over 200 with K ribbon.
        - modified the logic of countdown the balance that balance is decreased all the time after printing when the balance is under 200 with K ribbon.
	- fixed the bug that balance of K Ribbon is not decreased and rolling a ribbon after printing.



[ 1.01.13 ]

	- added the Anti-Static Mode
	- modified the LED to be off when soft-power off on SMART-31
	- modified the moving mode to FULL-STEP when a card is moved
	- supported the function of Cleaning roller on SMART-31
	- fixed the bug of magnetic encoding with Upper JIS mode 
	- fixed the bug that location of Track1, Track3 isn't changed with Upper MS mode
	- fixed the bug the next card is inserted after magnetic read/write action
	- fixed the bug not to show the IP address after loading a NetworkModule IP on LCD panel
	- fixed the bug that replaced ribbon isn't recognized when PC WITNESS, ROOT/USER LOCK is activated



[ 1.01.08 ]

	- adjusted the range of detecting a color of Ribbon
	- modified the start position of panel on 1/3YMCKO ribbon
	- fixed the logo image when a Aribic language in the LCD panel



[ 1.01.01 ]

	- supported 300x600, 300x1200 dpi Mode
	- supported 1/3YMCKO ribbon
	- added the Hopper Align Mode for sigle Card Feeder (SMART-51 Only)
	- added the function that prints a test page by LED button with YMCKO and K ribbon
	- added the Arabic language in the LCD panel
	- adjusted the range of detecting a color of Ribbon
	- modified the function to work the printer even if the balance is 0 with K ribbon
	- modified the function to detach the K ribbon from a card on the backside printing easier with YMCKOK ribbon
	- fixed to use the both sides color printing with YMCKOK ribbon
	- fixed the issue that the panel doesn't find normally after magnetic encoding with YMCKOK ribbon
	- fixed the synchronization the vendor/region code between the Printer and Laminator when the laminator error occurs
	- fixed the issue the input command of Right LED button is delayed when CaseOpen status



[ 1.00.08 ]

	- supported the Erase Tag
	- fixed the issue that balance is decreased by 2 with YMCKOK ribbon when K panel is used on the backside printing
	- fixed the issue that the spool data is sent twice when Spool Error occurs



[ 1.00.07 ]

	- modified the diplay YMC,BYMCKO and YMCKOKR ribbon to the unsupported ribbon
	- fixed the freezing issue when the updating a Firmware through USB connection 
	- fixed the issue that balance is decreased by 2 on the bothsides printing